Little Party
The Little Party is the smaller version of the Party. Light enough
for indoor flying but can be flown in the backyard. The Little Party has
landing gear, so take offs and touch and goes are possible (and fun!),
but it flies slow enough for backyard flying on the grass. The Little
Party comes almost ready to fly.
The wings and tails are covered with Light Span fabric and decorated.
The fuselage consists of a wooden tail boom, which holds the tails in
back, the wing mounts and the motor system in front. The fuselage is
under-slung from the boom similar to a parasol type aircraft. The wheels
are attached to the fuselage making the Little Party a tail-dragger.
Very nice work and a well thought out design making for a very stable
and forgiving flier. This airplane is almost ready to fly with some
assembly, radio and motor system installation left for the customer.
This is an airplane made in the Czech Republic so the quality is top
notch, but does not come with a hardware package. Performance with the
supplied motor and reduction drive is good and makes the Little Party
light enough for indoor flying. Climb is good and the Little Party is
capable of ROG-ing from smooth ground or pavement. The speed and
duration of the fights is dictated by the battery pack used. We suggest
the 110 mah battery pack for indoor and the larger packs for outdoor
use. The 110 mah will give 5-7 minutes of flight time indoors; the 225
mah will give 14-18 minutes. We recommend the JR NES-371's or JR E151's
for the sub-micro servos. The JR R610 FM micro receiver is an ideal
choice for the receiver.
- Wingspan: 31.5"
- Wing area: 238 sq. in.
- Weight: 6-7 oz.
- Wingloading: 3.65-4.25 oz./sq. ft.
- Airfoil: Undercambered
- Motor: supplied with reduction drive and prop.
- Radio required: micro receiver, 2 sub micro servos, micro speed
control, 7.2V 110mAh nicad
|
